SJShanghai Shijin Industrial

50W600 Non-Oriented Electrical Steel

A lower-loss step up from the standard grade for medium motors and compressors that need better efficiency at the same stack height.

50W600 Non-Oriented Electrical Steel

50W600 offers reduced core loss compared with the standard grade while keeping the same 0.50 mm thickness, so existing laminations can be run without tooling changes while efficiency improves.

Technical specification

Specification table for 50W600 Non-Oriented Electrical Steel
Grade50W600
Thickness0.50 mm
Width range600 – 1250 mm (slit to your width)
Density7.75 g/cm³
Core loss P1.5/50≤ 6.00 W/kg
Magnetic induction B50≥ 1.74 T
Surface insulationC5 organic coating
Reference standardGB/T 2521, EN 10106

Typical applications

  • Medium AC motors
  • Compressors
  • Gear motors
  • Industrial fans

Related grades

35W300 Non-Oriented Electrical Steel

35W300

35W300 Non-Oriented Electrical Steel

A thinner gauge for high-speed motors and generators, where eddy current loss rises with operating frequency.

View details
25W230 Non-Oriented Electrical Steel

25W230

25W230 Non-Oriented Electrical Steel

A thin-gauge, low-loss grade for high-speed and high-frequency machines where eddy current loss has to be kept low.

View details

Specification support

Send your drawing and we will confirm the grade fit

Share the lamination drawing, core width or strip width and annual volume. We will advise on grade selection, coating and processing before quoting.

Send InquiryQuality & certification